Some examples of installation

feel free to ask questions to alex@rubli.net

Here is an example of installing the HTR214 in a Radson 140 Amplifier.

This Installation took place in a RADSON amplifier model 214, which has a doubling power supply, I inserted a small and very thin screw in the eyelet that secures the electrolytic capacitor,I used the plastic insulators and glued them to the chasis.

I unsoldered the cables that go to each output transformer and the one the resitor that goes to the next capacitor,those three connections went to the input of the circuit.

I soldered the output directly to the junction of the positive diode and the capacitor.