Manufacturer's Specifications
amplifier menuMain Menu

Amplifier details
Specifications
Schematic diagrams
Vintage test report

 
   
Year of manufacture: 1961-1966
Manufactured by: Pye Ltd. Radio Works Cambridge England
Price when new (in the UK): £66 3s (chassis model), £71 8s in veneered wooden case
Description: Integrated amplifier
Mono/stereo: stereo
Power output: 15 watts music power per channel at 15 ohms
Distortion: typically less than 0.35% at 1,000 c/s
Frequency response: piezo PU and magnetic PU correct to within 1½ dB of published RIAA replay curves; radio and auxiliary 30-20,000 c/s ± 1½ dB (power amplifier up to 35,000 c/s)
Signal to noise ratio: relative to 15 watts into 15 ohms, piezo PU and magnetic pickup -60 dB, radio and auxiliary -65 dB, main power amplifier section - 90 dB
Channel separation: better than - 50 dB
Inputs: magnetic input: 21 mV; Piezo Input: 70 mV; radio 35 mV; auxiliary 35 mV.
Tone controls: bass (± 10 dB at 100 c/s); treble (± 10 dB to -15 dB at 10,000 c/s)
Filters: scratch filter (roll-off from 5,000 c/s at 6 dB/octave); rumble filter (roll-off from 50 c/s, reaching 12 dB/octave below 20 c/s)
Tape output: 100 mV
Output impedance: 4 to 15
Damping factor: 50
Dimensions: 11¼ in x 3½ in x 8¼ in. (286 x 89 x 210 mm)
Power supply: 110-127,190-210,211-230 and 231-250V ac only, 50/60 c/s