The 272 was one of Scott's most expensive integrated stereo amplifiers with a high-quality 38 watts per channel (44 music power) output stage and Dynaural (dynamic rumble filter) circuitry. This was Scott patent and was designed to eliminate turntable and record rumble without affecting the music quality.

Large TR-12-2 output transformers and EL84s necessitated a higher than usual profile (the amplifier was 6¾ inches or 174 mm tall) and the use of the large-format "G" type chassis made this quite a heavy piece of equipment, weighing in at 42lbs (19.1 kg).

The front end comprised six 12AX7's and a 6AU6 (for the Dynaural circuit). Controls included separate bass and treble for each channel, centre channel level control, separate controls for each power amplifier, phono input level, loudness control (Fletcher-Munson), scratch filter, rumble suppression control and an 'acoustic level' control. The row of indicator lamps at the top of the control panel showed the mode of operation. The amplifier also had the facility to be used as electronic crossover.

The 272 in standard form was supplied with brown plastic knobs (as seen in the pictures at right), however for an additional $4.95 one could have metal knobs as an optional extra. In 1962 the 272 was replaced by the 296 (the most powerful valve stereo integrated amplifier Scott produced).

Priced at $269.95 when new, a 272 in excellent cosmetic and functional condition can today reach prices of $1500 or more.

Click on a thumbnail
for enlargement